- Research
- Open access
- Published:
A sustainable thermochemical conversion of animal biomass to N-heterocycles
Collagen and Leather volume 5, Article number: 1 (2023)
Abstract
The production of high-valued organonitrogen chemicals, especially N-heterocycles, requires artificial N2 fixation accompanied by the consumption of fossil resources. To avoid the use of these energy- and resource-intensive processes, we develop a sustainable strategy to convert nitrogen-rich animal biomass into N-heterocycles through a thermochemical conversion process (TCP) under atmospheric pressure. A high percentage of N-heterocycles (87.51%) were obtained after the TCP of bovine skin due to the abundance of nitrogen-containing amino acids (e.g., glycine, proline, and l-hydroxyproline). Animal biomass with more diverse amino acid composition (e.g., muscles) yielded higher concentrations of amines/amides and nitriles after TCP. In addition, by introducing catalysts (KOH for pyrrole and Al2O3 for cyclo-Gly–Pro) to TCP, the production quantities of pyrrole and cyclo-Gly–Pro increased to 30.79 mg g−1 and 38.88 mg g−1, respectively. This approach can be used to convert the significant animal biomass waste generated annually from animal culls into valued organonitrogen chemicals while circumventing NH3-dependent and petrochemical-dependent synthesis routes.
Graphical Abstract
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1186%2Fs42825-022-00109-z/MediaObjects/42825_2022_109_Figa_HTML.png)
1 Introduction
Organonitrogen chemicals are critical molecules for various industries including agriculture and medicine. N-heterocycles (such as pyrroles, pyridines, indoles, and cyclic dipeptides) are one of the most important classes of synthetic organonitrogen chemicals, accounting for more than 67% of compounds in the comprehensive medicinal chemistry database [1,2,3]. Currently, N-heterocycles are synthesized in an energy- and resource-intensive two-step process where first N2 is fixed using high temperature and pressure (i.e., Haber–Bosch process), and the resultant NH3 is then reacted with carbon sources derived from petrochemicals [4,5,6,7,8,9]. For example, the resultant NH3 reacted with petroleum derived furan to prepare pyrroles [10]. Pyridines are often synthesized through condensation of aldehydes, ketones, or α, β-unsaturated carbonyl compounds with NH3 or NH3 derivatives [11]. While, the high energy barrier of the N≡N bond (941 kJ mol−1) means that N2 fixation requires significant electricity consumption (1 to 3% of the world’s electricity) and fossil fuel consumption (3–5% of the world’s natural gas production) [12]. Therefore, efficient routes for synthesizing N-heterocycles and other organonitrogen chemicals need to be developed to circumvent the current dependence on artificial N2 fixation, harsh reaction conditions, fossil resources, and multiple energy-intensive synthesis steps [13,14,15].
Along with the ardent desire to transform the chemical industry into a greener and more sustainable manner, it will be significant to explore alternative routes to access organonitrogen chemicals from renewable sources. Recently, plant biomass (e.g., cellulose, hemicelluloses, and lignin) becomes one of the strategies to synthesize high-valued organonitrogen chemicals from renewable resources without the need for carbon from fossil resources [16,17,18]. However, extrinsic nitrogen source is still required due to the relative absence of nitrogen in plant tissue (0.3 to 5 wt.% of dry weight) [19, 20]. For instance, after being impregnated with 10% urea, wood chips could transform into pyrolysis oil with large content of organonitrogen chemicals [21]. Ammonia can also react with the cracked bonds (C–C, C–O, C=O, C–H and/or O–H) of cellulose during the thermal treatment to obtain a large number of diverse nitrogen-containing compounds [22]. Moreover, with the help of ammonia, furfural (a platform chemicals from hemicellulose) could be a substrate for the production of N-heterocycles through a single-step decarbonylation-amination reaction in a catalytic system [7]. Generally, the key chemistry of the above strategies is based on the transformation of oxygen-containing groups of these starting materials into nitrogen-containing molecules with the involvement of ammonia or its derivatives derived from artificial N2 fixation. Therefore, the need of fossil resources, harsh reaction conditions, and multiple energy-intensive synthesis steps still significantly hampered the further development of these plant biomass-based production of organonitrogen chemicals.
Nitrogen-rich biomass resource utilization can expand the boundaries of biorefinery and product diversity. The natural nitrogen cycle in the ecosystem begins with N2 fixation (e.g., diazotrophs), after which nitrogen migrates up the food chain and finally accumulates mainly in the form of amino acids (Fig. 1a) [23,24,25,26,27]. Therefore, animal biomass often contains higher nitrogen (> 12 wt.% of dry weight) (Additional file 1: Fig. S1) than that of plant biomass, and this abundant nitrogen is primarily in the form of proteins. This accumulation of nitrogen in animals potentially offers a route towards the one-step conversion of biomass into organonitrogen chemicals. Currently, no previous studies have been reported focusing on the potential use of animal biomass in synthesizing high-valued organonitrogen chemicals. Composed of amino acids, animal tissues require relatively less energy to decompose compared with chitin, or other nitrogen-rich biomass, which needs complex or harmful pre-treatments to break down the recalcitrant structures due to the high crystallization and widespread hydrogen-bond networks [28, 29]. Moreover, from a sustainable and ethical perspective, the number of the top five species of livestock is ever expanding and has reached 2.77 × 1010 in 2017 globally [30], and about 1.11 × 109 animal carcasses need to be disposed annually due to the general mortality of livestock (3–5%), not to mention carcasses related to culls. This large number of waste animal biomass threatens public health safety and can cause severe environmental problems without proper and prompt disposal.
Comparison between the conventional two-step route and the one-step animal biomass-dependent TCP route to generate N-heterocycles. a Schematic illustration of organonitrogen synthesis using TCP compared with the traditional chemical synthesis based on artificial N2 fixation and fossil resources conversion (based on the Haber–Bosch process). b Schematic of the internal structure of the TCP device with the controlled temperature from 300 to 800 °C under atmospheric pressure. c Molecular structures and industrial applications of representative obtained N-heterocycles. d Optical photographic image of the installation of an actual TCP device
Herein, we develop a viable one-step strategy to produce N-heterocycles from animal biomass obtainable from culls or processing plants (i.e., bovine skin, bovine muscle, chicken muscle, porcine muscle, and fish muscle) using thermochemical conversion process (referred to as TCP) under atmospheric pressure. Compared with the traditional chemical synthesis involved in artificial N2 fixation and refinement of fossil resources, TCP presents as a more convenient and straightforward way to obtain N-heterocycles (Fig. 1b–d), during which the organic intermediates of nitrogen-rich animal biomass are largely decomposed and restructured during the thermochemical process (Additional file 1: Figs. S2–6). Our results show that the bio-oil produced from bovine skin after TCP has a high content of N-heterocycles (87.51% in all nitrogenous products), while other types of animal biomass result in a more uniform distribution of N-heterocycles, amines/amides, and nitriles. Mechanistic studies provide insight into the formation mechanisms of different N-heterocycles and how the presence and concentration of these compounds after TCP correlate with the distribution of amino acids in the different biomass sources. For example, cyclo-Gly–Pro could be easily generated after the dehydration condensation of glycine (Gly) and proline (Pro) in bovine skin. These findings demonstrate that the conventional two-step synthesis routes currently used for synthesizing organonitrogen chemicals can be completely circumvented through the further development of this sustainable, one-step thermochemical conversion strategy of animal biomass.
2 Experimental
2.1 Pre-treatment of animal biomass
The bovine skin powder was prepared from bovine skin according to the standard procedures of traditional leather industry [31]. In brief, the bovine skin was cleaned, un-haired, limed, splitted, and delimed to remove non-collagen components. Then the skin was soaked in an aqueous solution of acetic acid (16.0 g L–1) for 1.5 h and washed by high-purity Milli-Q water for three times to remove mineral substances. After the pH was adjusted about 4.8 with acetic acid-sodium acetate buffer solution, the bovine skin was dehydrated by absolute ethyl alcohol, dried in vacuum.
The other four types of animal biomass (bovine muscle, chicken muscle, fish, and porcine muscle) were first cut into debris, and then demineralized by stirring in an equal mass EDTA-Na4 solution (2 wt.%) for 24 h. After washed for three times by high-purity Milli-Q water, the collections were dried in a freeze dryer. Finally, the dried samples were degreased with petroleum ether through Soxhlet Extraction Method, and further dried in room temperature overnight. The use of degreaser is to remove the fat in the animal biomass to avoid the effect of fat in our experiment to study the conversion of animal protein to N-containing chemicals. In practical application scenario, there is no need of use of degreaser to remove the fat which can be processed with protein for nitrogenous chemical production. Finally, the animal biomass was ground and sieved, and the sifted (20 mesh, < 0.85 mm) biomass powder was obtained.
2.2 The bench-top units of TCP
A bench-top continuous flow reactor consisted of a quartz tube reactor heated by a furnace, and a condensation tube bathed in ice water was set up for the thermochemical conversion process (TCP, Fig. 2a). Firstly, the furnace chamber was heated to the preset temperature (300–800 °C) and the N2 flow was injected for 20 min with the rate of 50 mL min–1 to ensure that the inner air was discharged completely. Then, quartz tube reactor loaded with 3.0 g pre-treated animal biomass powder (bovine skin, bovine muscle, chicken muscle, porcine muscle, fish, or a mixture of Gly, Pro, and Hyp) was put into the furnace chamber with the preset temperature. In the thermochemical conversion process, the bovine skin biomass was mixed with catalysts uniformly and added into the reactor (mass ratio of catalyst/feedstock = 1:1) before reaction.
Analysis of the nitrogenous compounds derived from different animal biomass via TCP. a Schematic illustration of the fixed bed nitrogen-rich thermochemical conversion and collection system of TCP at 700 °C under atmospheric pressure for 30 min. b Nitrogen proportions of three phases products (bio-gas-N, bio-oil-N, and bio-char-N) in total nitrogen of different animal biomass. c The contents of the four parts of nitrogenous compounds (N-heterocycles, amines/amides, nitriles, and others) in all the nitrogenous compounds of bio-oil. d The contents of the six N-heterocycle products in all the nitrogenous compounds of bio-oil
2.3 Collection of the products in three phases
When the reaction began, the animal biomass powder was heated up rapidly and the volatile evolved out quickly. During TCP, the bio-oil was trapped in the ice-water mixture condensing unit. The bio-char was remained in quartz tube reactor. The bio-gas was collected via the bubbling system where H2SO4 (0.1 mol L–1) and NaOH (0.2 mol L–1) solutions were used for NH3 and HCN collection, respectively. The following mixed tail gas was collected by gas collecting bag, which was then tested by gas chromatography (GC) to further obtained the content (vol %) of each composition in the mixed gas.
3 Results and discussion
Bio-oil, bio-gas, and bio-char can be produced by the TCP (Fig. 2a), and each contains different types of nitrogenous compounds. The corresponding nitrogen proportions of the produced bio-oil in total nitrogen (nitrogen in the raw animal biomass) varies from 28.21 to 44.00 wt.% among the five types of animal biomass (Fig. 2b and Additional file 1: Fig. S7–9), and these nitrogenous products can be primarily identified as four categories: N-heterocycles, amines/amides, nitriles, and others (other nitrogenous compounds) (Additional file 1: Table S1). Notably, the content of N-heterocycles in all the nitrogenous compounds of bio-oil from bovine skin reaches 87.51% (Fig. 2c), while nitrogenous products in bio-oil from other types of animal biomass distributes more equally between N-heterocycles (36.63–57.51%), amines/amides (23.16–36.66%), and nitriles (12.34–19.12%). The obtained N-heterocycles are mainly present as cyclo-Gly–Pro, pyrrole, indole, pyrrole-2-carboxamide, 1,4-diazabicyclo[4.3.0]nonan-2,5-dione,3-methyl, and 5,10-diethoxy-2,3,7,8-tetrahydro-1H,6H-dipyrrolo[1,2-a:1',2'-d]pyrazine (Fig. 2d). For bovine skin, cyclo-Gly–Pro is the dominant N-heterocycle (22.72% of all the nitrogenous compounds), while pyrrole-2-carboxamide and pyrrole account for 11.24% and 9.81%, respectively. Indole is the dominant N-heterocycle (6.46–9.51%) for the other four types of animal biomass (bovine muscle, chicken muscle, porcine muscle, and fish). Bio-gas is also produced in large quantities after TCP, and a large proportion of nitrogen is present in the bio-gas as HCN and NH3 (Additional file 1: Fig. S10). Bio-char can be also collected, albeit in lower quantities, and the nitrogen in bio-char is mainly present as pyridinic-N, pyrrolic-N, and quaternary-N (Additional file 1: Figs. S11–17).
The amino acid contents of the different types of animal biomass correlate with the specific organonitrogen chemicals produced during TCP, which gives mechanistic insight into the transformations of nitrogen during the conversion process (Fig. 3a and Additional file 1: Table S2). For example, bovine skin has a high content of glycine (Gly, 18.45 wt.%), proline (Pro, 23.90 wt.%), and l-hydroxyproline (Hyp, 11.87 wt.%), which together contribute to the formation of N-heterocycles (87.51%).
Nitrogen transformation from the animal biomass into main N-heterocycles. a The contents of the amino acids in the animal biomass. b GC–MS spectrum of the products in bio-oil after TCP of the mixture of glycine, proline, and l-hydroxyproline. c Proposed mechanism of nitrogen transformation from amino acids into the N-heterocycles
To confirm that these three amino acids are the main drivers of N-heterocycles formation, TCP was performed on a mixture of just Gly, Pro, and Hyp, which yielded the same three main N-heterocycle products as bovine skin (i.e., pyrrole, 5,10-diethoxy-2,3,7,8-tetrahydro-1H,6H-dipyrrolo[1,2-a:1',2'-d]pyrazine, and cyclo-Gly–Pro) (Fig. 3b and Additional file 1: Table S3). Specifically, cyclo-Gly–Pro is a conjugate of Gly and Pro/Hyp (Fig. 3c) [32], while 5,10-diethoxy-2,3,7,8-tetrahydro-1H,6H-dipyrrolo[1,2-a:1',2'-d]pyrazine forms through the dimerization between Pro or Hyp [33], and pyrrole forms from Pro or Hyp degradation through H* release and the loss of COOH*, or further loss of H2O [34].
For the other types of animal biomass, leucine (Leu) (6.93–9.65 wt.%) and glutamic (Glu) (12.80–17.16 wt.%) are the dominant amino acids. Leu is pyrolyzed into pyrrole by releasing H* followed by the loss of COOH* and its side-chain [35]. Pyrrole could also potentially be produced by the reaction of Glu with any amino acids through the loss of H2O and any side groups to form an 8-membered ring followed by decarbonylation and deamination [36]. Additionally, the muscle and fish animal biomass have higher contents of tyrosine (Tyr) (1.86 to 3.52 wt.%) and phenylalanine (Phe) (2.80 to 3.95 wt.%) than bovine skin (0.41 and 1.63 wt.%), which lead to the formation of indole through the dehydrogenation, decarboxylation, and dehydration reactions of Tyr and Phe [37]. Collectively, these results indicate that the transformation of nitrogen is closely related to the specific amino acids composition of the animal biomass source.
The temperature used for TCP determines the nitrogen proportion of three phases products in total nitrogen of bovine skin. The bio-gas-N proportion increases from 13.64 to 53.80 wt.% with the increasing temperature (< 600 °C) then remain almost unchanged at higher temperature (> 600 °C). And the bio-oil-N proportion increases from 1.72 to 33.03 wt.% with the increasing temperature, while the corresponding bio-char-N proportion reduces from 84.64 to 18.63 wt.% (Fig. 4a and Additional file 1: Fig. S18–21). The content of N-heterocycles in all the nitrogenous compounds of bio-oil is 26.43% and the content of amines/amides is 60.74% at 300 °C (Fig. 4b and Additional file 1: Table S4), but when the temperature of TCP is increased to 700 °C, the content of N-heterocycles dramatically increases to 87.51%.
Nitrogen transformation from bovine skin at different TCP temperatures. a Nitrogen proportions of three phases products (bio-gas-N, bio-oil-N, and bio-char-N) in total nitrogen. b The contents of the four parts of nitrogenous compounds (N-heterocycles, amines/amides, nitriles, and others) in all the nitrogenous compounds of bio-oil. c The contents of the five N-heterocycle products in all the nitrogenous compounds of bio-oil. d Proposed mechanism of nitrogen migration from bovine skin into N-heterocycles
Moreover, among the obtained N-heterocycle products, the contents of cyclo-Gly–Pro and pyrrole increase with rising temperature (Fig. 4c). These above results suggest that the nitrogen of proteins in bovine skin can just be cracked into bio-gas and a few bio-oil compounds (amines/amides, nitriles, and N-heterocycles) due to the weak deamination and dehydration at low temperatures (300 to 500 °C) of TCP (Fig. 4d). Another portion of nitrogen from proteins migrates into the bio-char as pyridinic-N and pyrrolic-N at low temperatures (Additional file 1: Fig. S22–24). While, at high temperatures (500 to 800 °C), the bio-oil nitrogen is mainly incorporated as N-heterocycles (Fig. 4b) owing to the vigorous cracking reactions and cyclization reactions of the amino acid fragments. Meanwhile, the amines/amides will further decompose into N-heterocycles through the deamination reaction. Moreover, the pyridinic-N in bio-char can also transform into quaternary-N by ring condensation reactions, and further decompose into N-heterocycles [36]. Finally, bio-gas can release from the cracking of bio-oil or bio-char, so that the proportion of bio-gas-N accumulates at higher temperatures.
Among all the N-heterocycles derived from bovine skin, pyrrole and cyclo-Gly–Pro are two major N-heterocycles. Pyrroles have the advantages of high biological activity and low toxicity, which were widely used as important platform chemicals in the agrochemical, pharmaceutical, and dye industries [38]. Cyclo-Gly–Pro, a type of cyclic dipeptide, is reported to demonstrate physiological activities such as anti-amnesic effects and neuroprotective actions [39, 40]. To enhance the generation of these two valuable N-heterocycles, different types of catalysts (solid acid catalyst, metal oxides, metals, and alkalis) were introduced to TCP. The contents of N-heterocycles in all nitrogenous compounds of bio-oil slightly increased when solid acid catalyst, metal oxides, and metals were introduced. Inversely, alkalis (Ca(OH)2 and KOH) decreased the contents of N-heterocycles in all nitrogenous compounds of bio-oil from 87.51% to 72.78% and 74.31%, respectively (Fig. 5a).
Nitrogen transformation from bovine skin through TCP at 700 °C with different catalysts. a The contents of the nitrogenous compounds (N-heterocycles, amines/amides, and nitriles) in all the nitrogenous compounds of bio-oil. b The contents of the pyrroles (pyrrole and its alkyl derivates) and cyclo-Gly-Pro in all the nitrogenous compounds of bio-oil. c The actual production quantities of pyrrole and cyclo-Gly–Pro derived from bovine skin (mg g−1). d The nitrogen contents of HCN-N and NH3-N in total nitrogen derived from bovine skin after TCP at 700 °C
Additionally, the catalysts promoted the generation of pyrroles (pyrrole and its alkyl derivates) or cyclo-Gly–Pro (Fig. 5b), which was determined by the types of catalysts. The content of pyrroles in all nitrogenous compounds of bio-oil was increased from 27.43% to 45.18% by acidic ZSM-5 catalyst, which could promote the dehydration reaction and pyrroles polymerization reaction [38]. Metal oxides (Fe2O3 and Al2O3) and metals (Ni and Pd) increased the content of cyclo-Gly–Pro in all nitrogenous compounds of bio-oil from 14.29% to 25% ~ 33.57%. The solid acid catalyst, metal oxides, and metal catalysts (especially ZSM-5 and Al2O3) provide an acid environment, which improved the cracking reaction of protein and promoted more organic compounds to decompose into small molecules. Thus, more cyclo-Gly–Pro could derive from the condensation of light N-containing chemicals (acetamide, propylamine, and hydroxyethylamine) as well as the dimerization of Gly and Pro/Hyp [41,42,43]. On the other hand, the alkalis (Ca(OH)2 and KOH) increased the basicity of the pyrolysis environment and promoted the decarboxylation process, which resulted in the content increase of the pyrrole and its alkyl derivatives generating mainly from the decarboxylation process of Pro and Hyp [44, 45]. Meanwhile, the loss of carboxy inhibited the dimerization of Gly and Pro/Hyp and caused the decrease of the content of cyclo-Gly–Pro. Simultaneously, the contents of pyrroles and amines/amides (ring-opening product) increased (Fig. 5a and b). Furthermore, the production quantities of pyrrole and cyclo-Gly–Pro were determined by constructing calibration curves of their standards (Additional file 1: Fig. S25). The production quantities of pyrrole and cyclo-Gly–Pro were increased to 30.79 mg g−1 and 38.88 mg g−1 by introducing KOH and Al2O3 catalysts into TCP, respectively (Fig. 5c). The production quantities of the object products were highly consistence with the contents in the bio-oil.
The release of HCN and NH3 could also confirm the change of N-heterocycles contents (Fig. 5d). Obviously, these catalysts increased the N content of NH3 which indicated a promotion of the deamination and dehydration, and decreased the N content of HCN. The limitation of the release of HCN might be attributed to the increase of the main N-heterocycles (pyrroles or cyclo-Gly–Pro), which demonstrated an enhanced condensation and suppressed degradation of these N-heterocycles. In addition, due to the remarkable transformation from N-heterocycles to amines/amides by Ca(OH)2 or KOH, the source of HCN decreased thus inhibiting the generation of HCN. These results demonstrated that the catalysts were conducive to controlling the emissions of the valuable nitrogenous tail gases (especially HCN and NH3). Besides, the composition and content of other tail gases were measured and the low heating values (LHV) of the mixed gases varied from 10.01 to 15.78 MJ Nm–3 (Additional file 1: Fig. S26 and 27), which mean that these tail gas might be potential gas fuels after appropriate post-treatments of the valuable gases [46].
4 Conclusions
In summary, we propose a new method for producing high-value N-heterocycles from animal biomass through a sustainable thermochemical conversion process (named as TCP). In this research, the generation of nitrogenous products and the transformation mechanism of different animal biomass were comparatively investigated. Specifically, high content of N-heterocycles (87.51%) was obtained from bovine skin. Furthermore, the production quantities of pyrrole and cyclo-Gly–Pro (main N-heterocycle) could be increased to 30.79 mg g−1 and 38.88 mg g−1 by introducing KOH and Al2O3 catalysts into TCP, respectively. From a fundamental perspective, TCP provides a facial and one-step strategy for access to organonitrogen chemicals that are normally dependent on artificial N2 fixation via harsh reaction conditions, non-renewable carbon sources (fossil resources), and multistep synthesis routes.
Availability of data and materials
All data from this study are presented in the paper and the supporting information.
Change history
06 May 2023
A Correction to this paper has been published: https://doi.org/10.1186/s42825-023-00121-x
Abbreviations
- TCP:
-
Thermochemical conversion process
- Gly:
-
Glycine
- Pro:
-
Proline
- Leu:
-
Leucine
- Glu:
-
Glutamic
- Tyr:
-
Tyrosine
- Phe:
-
Phenylalanine
- LHV:
-
Low heating value
References
Chen X, Song S, Li H, Gözaydın G, Yan N. Expanding the boundary of biorefinery: organonitrogen chemicals from biomass. Acc Chem Res. 2021;54(7):1711–22.
Liu J. Nitromethane as a nitrogen donor in Schmidt-type formation of amides and nitriles. Science. 2019;367(6475):eaay9501.
Bur SK, Padwa A. The pummerer reaction: methodology and strategy for the synthesis of heterocyclic compounds. Chem Rev. 2004;104(5):2401–32.
Wang Y, Zhang W, Xi Z. Carbodiimide-based synthesis of N-heterocycles: moving from two classical reactive sites to chemical bond breaking/forming reaction. Chem Soc Rev. 2020;49(16):5810–49.
Shi R, Zhao Y, Waterhouse GIN, Zhang S, Zhang T. Defect engineering in photocatalytic nitrogen fixation. ACS Catal. 2019;9(11):9739–50.
Chen JG, Crooks RM, Seefeldt LC, Bren KL, Bullock RM, Darensbourg MY, et al. Beyond fossil fuel-driven nitrogen transformations. Science. 2018;360(6391):eaa6611.
Song S, Yuen VFK, Di L, Sun Q, Zhou K. Integrating biomass into the organonitrogen chemical supply chain: production of pyrrole and d-proline from furfural. Angew Chem Int Ed. 2020;59(45):19846–50.
Smil V. Detonator of the population explosion. Nature. 1999;400:415.
Chen X, Li N, Kong Z, Ong W, Zhao X. Photocatalytic fixation of nitrogen to ammonia: state-of-the-art advancements and future prospects. Mater Horiz. 2018;5(1):9–27.
Bishop RB, Denton WI. Production of pyrrole. US Pat. 1949;2,478,452.
Suresh Kumar Reddy K, Srinivasakannan C, Raghavan KV. Catalytic vapor phase pyridine synthesis: a process review. Catal Surv Asia. 2012;16:28–35.
Davis SJ, Caldeira K, Matthews HD. Future CO2 emissions and climate change from existing energy infrastructure. Science. 2010;329(5997):1330–3.
Scott V, Haszeldine RS, Tett SFB, Oschlies A. Fossil fuels in a trillion tonne world. Nat Clim Change. 2015;5:419–23.
Jiang X, Nie X, Guo X, Song C, Chen JG. Recent advances in carbon dioxide hydrogenation to methanol via heterogeneous catalysis. Chem Rev. 2020;120(15):7984–8034.
Miller JA, Bowman CT. Mechanism and modeling of nitrogen chemistry in combustion. Prog Energy Combust Sci. 1989;15(4):287–338.
Zhang Z, Song J, Han B. Catalytic transformation of lignocellulose into chemicals and fuel products in ionic liquids. Chem Rev. 2017;117(10):6834–80.
Li C, Zhao X, Wang A, Huber GW, Zhang T. Catalytic transformation of lignin for the production of chemicals and fuels. Chem Rev. 2015;115(21):11559–624.
Liang G, Wang A, Li L, Xu G, Yan N, Zhang T. Production of primary amines by reductive amination of biomass-derived aldehydes/ketones. Angew Chem Int Ed. 2017;56(11):3050–4.
Sulistyo SB, Woo WL, Dlay SS. Regularized neural networks fusion and genetic algorithm based on-field nitrogen status estimation of wheat plants. IEEE Trans Ind Inform. 2017;13(1):103–14.
Hansen PM, Schjoerring JK. Reflectance measurement of canopy biomass and nitrogen status in wheat crops using normalized difference vegetation indices and partial least squares regression. Remote Sens Environ. 2003;86(4):542–53.
Zheng Y, Wang Z, Liu C, Tao L, Huang Y, Zheng Z. Integrated production of aromatic amines, aromatic hydrocarbon and N-heterocyclic bio-char from catalytic pyrolysis of biomass impregnated with ammonia sources over Zn/HZSM-5 catalyst. J Energy Inst. 2019;93(1):210–23.
Wu H, Li H, Fang Z. Hydrothermal amination of biomass to nitrogenous chemicals. Green Chem. 2021;23(18):6675–97.
Ruiz-Cooley RI, Gerrodette T, Fiedler PC, Chivers SJ, Danil K, Balance LT. Temporal variation in pelagic food chain length in response to environmental change. Sci Adv. 2017;3(10): e1701140.
Niu S, Classen AT, Dukes JS, Kardol P, Liu L, Luo Y, et al. Global patterns and substrate-based mechanisms of the terrestrial nitrogen cycle. Ecol Lett. 2016;19(6):697–709.
Wu K, Wang S, Song W, Zhang J, Wang Y, Liu Q, et al. Enhanced sustainable green revolution yield via nitrogen-responsive chromatin modulation in rice. Science. 2020;367(6478):eaaz2046.
Zerkle AL, Poulton SW, Newton RJ, Mettam C, Claire MW, Bekker A, et al. Onset of the aerobic nitrogen cycle during the great oxidation event. Nature. 2017;542:465–7.
Melton DA. Pattern formation during animal development. Science. 1991;252(5003):234–41.
Gözaydın G, Song S, Yan N. Chitin hydrolysis in acidified molten salt hydrates. Green Chem. 2020;22(15):5096–104.
Chen X, Gao Y, Wang L, Chen H, Yan N. Effect of treatment methods on chitin structure and its transformation into nitrogen-containing chemicals. ChemPlusChem. 2015;80(10):1565–72.
FAO. World food and agriculture—Statistical pocketbook 2019, FAO, Rome, 2019, https://www.fao.org/home/en/.
Liao X, Zhang M, Shi B. Collagen-fiber-immobilized tannins and their adsorption of Au(III). Ind Eng Chem Res. 2004;43(9):2222–7.
Ren Q, Zhao C. Evolution of fuel-N in gas phase during biomass pyrolysis. Renew Sustain Energy Rev. 2015;50:408–18.
Choi SS, Ko JE. Dimerization reactions of amino acids by pyrolysis. J Anal Appl Pyrolysis. 2010;89(1):74–86.
Deb I, Coiro DJ, Seidel D. Decarboxylative formation of N-alkyl pyrroles from 4-hydroxyproline. Chem Commun. 2011;47(22):6473–5.
Liu G. Catalytic pyrolysis of amino acids: comparison of aliphatic amino acid and cyclic amino acid. Energy Convers Manage. 2016;112:220–5.
Chen W, Yang H, Chen Y, Xia M, Chen X, Chen H. Transformation of nitrogen and evolution of N-containing species during algae pyrolysis. Environ Sci Technol. 2017;51(11):6570–9.
Choi SS, Ko JE. Analysis of cyclic pyrolysis products formed from amino acid monomer. J Chromatogr A. 2011;1218(46):8443–55.
Xu L, Yao Q, Deng J, Han Z, Zhang Y, Fu Y, et al. Renewable N-heterocycles production by thermocatalytic conversion and ammonization of biomass over ZSM-5. ACS Sustain Chem Eng. 2015;3(11):2890–9.
Samonina G, Ashmarin I, Lyapina L. Glyproline peptide family: review on bioactivity and possible origins. Pathophysiology. 2002;8(4):229–34.
Guan J, Gluckman PD. IGF-1 derived small neuropeptides and analogues: a novel strategy for the development of pharmaceuticals for neurological conditions. Br J Pharmacol. 2009;157(6):881–91.
Anand R, Hegde SG, Rao BS, Gopinath CS. Catalytic synthesis of 2-Methyl pyrazine over Zn-modified zeolites. Catal Lett. 2002;84:265–72.
Kong X, Wang G, Li L, Sun M, Du X, Chen X. Cyclization of monoethanolamine to aziridine over Cs2O-P2O5/SiO2. Res Chem Intermed. 2012;38:1743–50.
Chen Y, Wu Y, Ding R, Zhang P, Liu J, Yang M, Zhang P. Catalytic hydrothermal liquefaction of D. tertiolecta for the production of bio-oil over different acid/base catalysts. AIChE J. 2015;61:1118–28.
Sun L, Zhang X, Chen L, Zhao B, Yang S, Xie X. Comparision of catalytic fast pyrolysis of biomass to aromatic hydrocarbons over ZSM-5 and Fe/ZSM-5 catalysts. J Anal Appl Pyrolysis. 2016;121:342–6.
Hao B, Xu D, Jiang G, Sabri TA, Jing Z, Guo Y. Chemical reactions in the hydrothermal liquefaction of biomass and in the catalytic hydrogenation upgrading of biocrude. Green Chem. 2021;23:1562–83.
Hu Z, Ma X, Jiang E. The effect of microwave pretreatment on chemical looping gasification of microalgae for syngas production. Energy Convers Manage. 2017;143:513–21.
Acknowledgements
We would like to thank X. He at the College of Biomass Science and Engineering of Sichuan University for GC-MS characterization.
Funding
This work was supported by the National Talents Program; National Natural Science Foundation of China (22178233, 22108181); Talents Program of Sichuan Province; Double First-Class University Plan of Sichuan University; State Key Laboratory of Polymer Materials Engineering (sklpme 2020-03-01); The Sichuan Province Postdoctoral Special Funding.
Author information
Authors and Affiliations
Contributions
JG and XL conceived the projects. YT and XW performed experiment analyses and drafted the manuscript. XX and CZ participated in part of the experiments. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare that they have no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Additional file 1
. Supporting Information.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Tang, Y., Xiao, X., Zhang, C. et al. A sustainable thermochemical conversion of animal biomass to N-heterocycles. Collagen & Leather 5, 1 (2023). https://doi.org/10.1186/s42825-022-00109-z
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1186/s42825-022-00109-z